| 
  • If you are citizen of an European Union member nation, you may not use this service unless you are at least 16 years old.

  • Whenever you search in PBworks, Dokkio Sidebar (from the makers of PBworks) will run the same search in your Drive, Dropbox, OneDrive, Gmail, and Slack. Now you can find what you're looking for wherever it lives. Try Dokkio Sidebar for free.

View
 

Analog Read Serial

Page history last edited by Jonathan Dietz 9 years, 7 months ago

 

/*
  AnalogReadSerial
  Reads an analog input on pin 0, prints the result to the serial monitor.
  Attach the center pin of a potentiometer to pin A3, and the outside pins to +5V and ground.
 
 This example code is in the public domain.
 */

 

// the setup routine runs once when you press reset:

 


void setup() {
  // initialize serial communication at 9600 bits per second:
  Serial.begin(9600);
}

 

// the loop routine runs over and over again forever:


void loop() {
  // read the input on analog pin 0:
  int sensorValue = analogRead(A3);
  // print out the value you read:
  Serial.println(sensorValue);
  delay(1);        // delay in between reads for stability
}

Comments (0)

You don't have permission to comment on this page.